Views: 0 Author: Site Editor Publish Time: 2021-12-08 Origin: Site
As the high-precision THK Linear Motion Guide is widely used in industrial automation, it is necessary to master certain installation skills. Master the correct method of installing the THK Linear Motion Guide to improve the service life and accuracy of the guide. Next, let's take a look at the installation of the THK Linear Motion Guide. Here are some answers.
Here is the content list:
Installation method using an installation reference surface.
Installation of THK Linear Motion Guide on the driven side.
First, use the assembly screws to fix the bottom reference surface of the THK Linear Motion Guide to the bottom assembly surface of the bed. And then use a vise to press the side reference surface of the slide rail against the side assembly surface of the bed to determine the position of the slide rail. Finally use torque to tighten the fixing screws with a spanner and a certain torque to press the bottom reference surface of the slide rail against the assembly surface of the bottom of the bed.
Straight-line block method
Place the linear gauge between the two THK Linear Motion Guides, and use a micrometer to calibrate the linear gauge so that it is parallel to the side reference surface of the reference side slide rail. Then calibrate the driven side slide rail according to the linear block gauge, start calibration from one end of the driven rail, and tighten the assembly screws with a specific torque in sequence.
Mobile platform law
Fix the two sliders on the reference side on a measurement platform, and install only one slider on the driven side. The slide rail and the sliding block are not fixed to the bed and the platform, and the micrometer scale attached to the top surface of the driven side sliding block is used. Measure the side reference surface of the driven side slider, start calibration from one end of the driven THK Linear Motion Guide, and tighten the assembly screws with a specific torque in sequence.
Imitate the reference side slide method
Fix one of the two sliders of the reference side THK Linear Motion Guide and the driven side rail to the platform. Then the slide rail on the driven side and the other slide rail are approximately respectively fixed to the bed and the platform, and the platform is moved based on the reference side slide rail. Starting from one end of the slide rail, while confirming the rolling resistance of the linear guide on the driven side, tighten the assembly screws with a specific torque in sequence.
Special tool method
Using professional tools to install the THK Linear Motion Guide means to use professional tools to determine the position of the driven side slide rail, and to tighten the assembly screws with a specific torque in sequence.
If you want to know more about THK Linear Motion Guide, you can communicate with us on the website. Our official website is https:// www.dks-linear.com/. Our company adheres to the corporate culture of "quality first, customer first", and has always made unremitting efforts to become a professional THK Linear Motion Guide supplier in the industry.
