 |
JAPAN
THK
LMH12UU
IN STOCK
High precision
Please consult customer service for details Certification
international
| Quantity: | |
|---|---|
THK LMH12UU Bearings
Designation | inscribed clecle diameter | outer diameter | Length | Flange diameter | ||||||
LMH…UU | Ball circuit | Weight(g) | dr | Tolerance | D | Tolerance | L | Tolerance | D1 | Tolerance |
LMH6UU | 4 | 21 | 6 | 0 -0.009 | 12 | 0 -0.011 | 19 | 0 -0.2 | 28 | 0 -0.2 |
LMH8UU | 4 | 33 | 8 | 15 | 24 | 32 | ||||
LMH10UU | 4 | 64 | 10 | 19 | 0 -0.013 | 29 | 40 | |||
LMH12UU | 4 | 68 | 12 | 21 | 30 | 42 | ||||
LMH13UU | 4 | 81 | 13 | 23 | 32 | 43 | ||||
LMH16UU | 5 | 112 | 16 | 28 | 37 | 48 | ||||
LMH20UU | 5 | 167 | 20 | 0 -0.010 | 32 | 0 -0.016 | 42 | 54 | ||
LMH25UU | 6 | 325 | 25 | 40 | 59 | 0 -0.3 | 62 | |||
LMH30UU | 6 | 388 | 30 | 45 | 64 | 74 | ||||
W | H | A | F | Hole for attachment d1×d2×h | Amgular Radial tolerance of flange µm | Eccentricity (max) µm | Radial clearance tolerance | Basic load rating | |
CN | CoN | ||||||||
18 | 5 | 20 | – | 3.4×6.5×3.3 | 12 | 12 | -5 | 21 | 27 |
21 | 5 | 24 | – | 3.4×6.5×3.3 | 12 | 12 | -5 | 27 | 41 |
25 | 6 | 29 | – | 4.5×8×4.4 | 12 | 12 | -5 | 38 | 56 |
27 | 6 | 32 | – | 4.5×8×4.4 | 12 | 12 | -5 | 42 | 61 |
29 | 6 | 33 | – | 4.5×8×4.4 | 12 | 12 | -7 | 52 | 79 |
34 | 6 | 31 | 22 | 4.5×8×4.4 | 12 | 12 | -7 | 79 | 120 |
38 | 8 | 36 | 24 | 5.5×9.5×5.4 | 15 | 15 | -9 | 88 | 140 |
46 | 8 | 40 | 32 | 5.5×9.5×5.4 | 15 | 15 | -9 | 100 | 160 |
51 | 10 | 49 | 35 | 6.6×11×6.5 | 15 | 15 | -9 | 160 | 280 |
DKS is a company specializing in the management of THK bearing. It has a large inventory and supports product customization. If the model you need is not found on the website, you can contact our company.
THK LMH12UU Bearings
Designation | inscribed clecle diameter | outer diameter | Length | Flange diameter | ||||||
LMH…UU | Ball circuit | Weight(g) | dr | Tolerance | D | Tolerance | L | Tolerance | D1 | Tolerance |
LMH6UU | 4 | 21 | 6 | 0 -0.009 | 12 | 0 -0.011 | 19 | 0 -0.2 | 28 | 0 -0.2 |
LMH8UU | 4 | 33 | 8 | 15 | 24 | 32 | ||||
LMH10UU | 4 | 64 | 10 | 19 | 0 -0.013 | 29 | 40 | |||
LMH12UU | 4 | 68 | 12 | 21 | 30 | 42 | ||||
LMH13UU | 4 | 81 | 13 | 23 | 32 | 43 | ||||
LMH16UU | 5 | 112 | 16 | 28 | 37 | 48 | ||||
LMH20UU | 5 | 167 | 20 | 0 -0.010 | 32 | 0 -0.016 | 42 | 54 | ||
LMH25UU | 6 | 325 | 25 | 40 | 59 | 0 -0.3 | 62 | |||
LMH30UU | 6 | 388 | 30 | 45 | 64 | 74 | ||||
W | H | A | F | Hole for attachment d1×d2×h | Amgular Radial tolerance of flange µm | Eccentricity (max) µm | Radial clearance tolerance | Basic load rating | |
CN | CoN | ||||||||
18 | 5 | 20 | – | 3.4×6.5×3.3 | 12 | 12 | -5 | 21 | 27 |
21 | 5 | 24 | – | 3.4×6.5×3.3 | 12 | 12 | -5 | 27 | 41 |
25 | 6 | 29 | – | 4.5×8×4.4 | 12 | 12 | -5 | 38 | 56 |
27 | 6 | 32 | – | 4.5×8×4.4 | 12 | 12 | -5 | 42 | 61 |
29 | 6 | 33 | – | 4.5×8×4.4 | 12 | 12 | -7 | 52 | 79 |
34 | 6 | 31 | 22 | 4.5×8×4.4 | 12 | 12 | -7 | 79 | 120 |
38 | 8 | 36 | 24 | 5.5×9.5×5.4 | 15 | 15 | -9 | 88 | 140 |
46 | 8 | 40 | 32 | 5.5×9.5×5.4 | 15 | 15 | -9 | 100 | 160 |
51 | 10 | 49 | 35 | 6.6×11×6.5 | 15 | 15 | -9 | 160 | 280 |
DKS is a company specializing in the management of THK bearing. It has a large inventory and supports product customization. If the model you need is not found on the website, you can contact our company.
