 |
JAPAN
INA BEARING
KWE20H-G3-V0
IN STOCK
High precision
Please consult customer service for details Certification
international
| Quantity: | |
|---|---|
INA KWE20H-G3-V0 Parameter information
| H | 30 mm | |
|---|---|---|
| B | 44 mm | |
| L | 70,4 mm |
| 1) | Positioning surface | |
|---|---|---|
| 2) | mark | |
| A1 | 12 mm | |
| A2 | 6 mm | |
| A3 | 6,5 mm | |
| AL1 | 14 mm | |
| aL max | 53 mm | a L and a R Depends on the length of the rail l max |
| aL min | 20 mm | a L and a R Depends on the length of the rail l max |
| aR max | 53 mm | a L and a R Depends on the length of the rail l max |
| aR min | 20 mm | a L and a R Depends on the length of the rail l max |
| b | 20 mm | 公差: -0,004 / -0,05 |
| G2 | M5 | Screws according to DIN ISO 4762-12.9 Maximum tightening torque（Nm）： M4 = 5 M5 = 10 M6 = 17 M8 = 41 If possible, measures should be taken to prevent the screws from loosening. |
| H1 | 5 mm | |
| H5 | 5 mm | |
| h | 16,5 mm | |
| h1 | 8,8 mm | |
| JB | 32 mm | |
| JL | 36 mm | |
| jL | 60 mm | |
| K1 | M5 | Screws according to DIN ISO 4762-12.9 Maximum tightening torque（Nm）： M3 = 2.5 M4 = 5 M5 = 10 M6 = 17 M8 = 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, measures should be taken to prevent the screws from loosening. |
| K5 | NIP-KE-M6 | Lubrication joint |
| L1 | 49,4 mm | |
| lmax | 1980 mm | The maximum length of a single rail; longer rails can be supplied in several sections and marked accordingly. According to the contract, the maximum length of a single rail can reach 6 meters. |
| T5 | 5,5 mm | 螺丝深度 |
| mW | 0,35 kg | The quality of the slider |
|---|---|---|
| mS | 2,2 kg/m | The quality of the rail |
| C | 13300 N | Basic dynamic load rating |
| C0 | 18000 N | Basic static load rating |
| M0x | 190 Nm | Rated static torque around X axis |
| M0y | 154 Nm | Rated static torque around Y axis |
| M0z | 154 Nm | Rated static torque around Z axis |
German INA KWE20H-G3-V0 sliding block has high working accuracy: the movement of the linear guide is realized by rolling, not only the friction coefficient is reduced to 1/50 of the sliding guide, but the difference between dynamic and static friction resistance is also reduced to achieve smooth movement. Reduce impact and vibration, not easy to produce crawling phenomenon, so it can achieve UM-level feed and positioning accuracy, which is beneficial to improve the response speed and sensitivity of CNC coefficients. Significantly reduce the driving rate: because the friction force is very small when the linear guide moves, only a small amount of power is required to make the machine move, and the power loss of the machine is obviously large, and the heat generated by friction is small, which is suitable For high-speed, frequent starting and reversing moving parts. The lubrication structure is simple: the linear guide is equipped with an oil cup on the slider, which can directly inject the grease with oil, and can also be connected to the oil supply pipe for automatic lubrication of the lubricating machine, so that the wear is reduced to less, and the master can be maintained for a long time jobs.
DKS is a company specializing in the management of THK bearing. It has a large inventory and supports product customization. If the model you need is not found on the website, you can contact our company.
INA KWE20H-G3-V0 Parameter information
| H | 30 mm | |
|---|---|---|
| B | 44 mm | |
| L | 70,4 mm |
| 1) | Positioning surface | |
|---|---|---|
| 2) | mark | |
| A1 | 12 mm | |
| A2 | 6 mm | |
| A3 | 6,5 mm | |
| AL1 | 14 mm | |
| aL max | 53 mm | a L and a R Depends on the length of the rail l max |
| aL min | 20 mm | a L and a R Depends on the length of the rail l max |
| aR max | 53 mm | a L and a R Depends on the length of the rail l max |
| aR min | 20 mm | a L and a R Depends on the length of the rail l max |
| b | 20 mm | 公差: -0,004 / -0,05 |
| G2 | M5 | Screws according to DIN ISO 4762-12.9 Maximum tightening torque（Nm）： M4 = 5 M5 = 10 M6 = 17 M8 = 41 If possible, measures should be taken to prevent the screws from loosening. |
| H1 | 5 mm | |
| H5 | 5 mm | |
| h | 16,5 mm | |
| h1 | 8,8 mm | |
| JB | 32 mm | |
| JL | 36 mm | |
| jL | 60 mm | |
| K1 | M5 | Screws according to DIN ISO 4762-12.9 Maximum tightening torque（Nm）： M3 = 2.5 M4 = 5 M5 = 10 M6 = 17 M8 = 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, measures should be taken to prevent the screws from loosening. |
| K5 | NIP-KE-M6 | Lubrication joint |
| L1 | 49,4 mm | |
| lmax | 1980 mm | The maximum length of a single rail; longer rails can be supplied in several sections and marked accordingly. According to the contract, the maximum length of a single rail can reach 6 meters. |
| T5 | 5,5 mm | 螺丝深度 |
| mW | 0,35 kg | The quality of the slider |
|---|---|---|
| mS | 2,2 kg/m | The quality of the rail |
| C | 13300 N | Basic dynamic load rating |
| C0 | 18000 N | Basic static load rating |
| M0x | 190 Nm | Rated static torque around X axis |
| M0y | 154 Nm | Rated static torque around Y axis |
| M0z | 154 Nm | Rated static torque around Z axis |
German INA KWE20H-G3-V0 sliding block has high working accuracy: the movement of the linear guide is realized by rolling, not only the friction coefficient is reduced to 1/50 of the sliding guide, but the difference between dynamic and static friction resistance is also reduced to achieve smooth movement. Reduce impact and vibration, not easy to produce crawling phenomenon, so it can achieve UM-level feed and positioning accuracy, which is beneficial to improve the response speed and sensitivity of CNC coefficients. Significantly reduce the driving rate: because the friction force is very small when the linear guide moves, only a small amount of power is required to make the machine move, and the power loss of the machine is obviously large, and the heat generated by friction is small, which is suitable For high-speed, frequent starting and reversing moving parts. The lubrication structure is simple: the linear guide is equipped with an oil cup on the slider, which can directly inject the grease with oil, and can also be connected to the oil supply pipe for automatic lubrication of the lubricating machine, so that the wear is reduced to less, and the master can be maintained for a long time jobs.
DKS is a company specializing in the management of THK bearing. It has a large inventory and supports product customization. If the model you need is not found on the website, you can contact our company.
